The Corrugated cardboard production line is comprised of raw paper stand, heating tunnel, single facer corrugating machine, decks across, multiphase pre-heater, folder glue machine, baker and finalizing design system, line pressing paper cutting machine, NC.Cutoff, stacking machine and boiler. The raw paper is fed from the raw paper stand, passing through the heating tunnel, where the paper is heated and the moisture inside the paper is adjusted. Then the paper is sent into the single facer corrugating device and is corrugated and shape-formed, adhered to another paper, forming single facer corrugated cardboard. After that, by the decks across the cardboard is sent to pre-heated by the multi-phase pre-heater. The glue putting machine puts glue onto the paper, and the glued paper is sent to the baker and finalizing design system, at this moment the final corrugated paper is formed and outputted continuously.
The formed paper then pass through the cutting and folding machine, where the paper is longitudinally cut and press-folded, and traverse cut, finally formed rectangle corrugated papers can be produced complete. At the end, corrugated paper is stacked, assorted, and counted by the stacking machine, and you will see the final products outputted by this whole line continuoushy.