| Code |
Title |
| EN 1104:2005 |
Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents |
| EN 12281:2002 |
Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| EN 12283:2002 |
Printing and business paper - Determination of toner adhesion |
| EN 1230-1:2001 |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 1: Odour |
| EN 1230-2:2001 |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
| EN 1230-2:2001/AC:2002 |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
| EN 12497:2005 |
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract |
| EN 12498:2005 |
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract |
| EN 12858:1999 |
Paper - Printing and business paper - Requirements for continuous stationery |
| EN 13676:2001 |
Polymer coated paper and board intended for food contact - Detection of pinholes |
| EN 14086:2003 |
Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
| EN 14338:2003 |
Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant |
| EN 14719:2005 |
Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| EN 1541:2001 |
Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract |
| EN 20187:1993 |
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
| EN 20287:1994 |
Paper and board - Determination of moisture content - Oven-drying method (ISO 287:1985) |
| EN 20535:1994 |
Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991) |
| EN 20638:1993 |
Pulps - Determination of dry matter content (ISO 638:1978) |
| EN 21974:1994 |
Paper - Determination of tearing resistance (Elmendorf method) (ISO 1974:1990) |
| EN 23035:1994 |
Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982) |
| EN 27213:1993 |
Pulps - Sampling for testing (ISO 7213:1981) |
| EN 643:2001 |
Paper and board - European list of standard grades of recovered paper and board |
| EN 643:2001/AC:2002 |
Paper and board - European list of standard grades of recovered paper and board |
| EN 644:1999 |
Paper - Untrimmed sizes - Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
| EN 645:1993 |
Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract |
| EN 646:2006 |
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board |
| EN 647:1993 |
Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract |
| EN 648:2006 |
Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board |
| EN 920:2000 |
Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract |
| EN ISO 12625-1:2005 |
Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2005) |
| EN ISO 12625-3:2005 |
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005) |
| EN ISO 12625-4:2005 |
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005) |
| EN ISO 12625-5:2005 |
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2005) |
| EN ISO 12625-6:2005 |
Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2005) |
| EN ISO 12625-7:2007 |
Tissue paper and tissue products - Part 7: Determination of optical properties (ISO 12625-7:2007) |
| EN ISO 12625-8:2006 |
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method (ISO 12625-8:2006) |
| EN ISO 12625-8:2006/AC:2006 |
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method (ISO 12625-8:2006) |
| EN ISO 12625-9:2005 |
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2005) |
| EN ISO 14453:1998 |
Pulps - Determination of acetone-soluble matter (ISO 14453:1997) |
| EN ISO 15318:1999 |
Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999) |
| EN ISO 15320:2003 |
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2003) |
| EN ISO 15755:1999 |
Paper and board - Estimation of contraries (ISO 15755:1999) |
| EN ISO 186:2002 |
Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN ISO 1924-2:1995 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (ISO 1924-2:1994) |
| EN ISO 216:2001 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216:1975) |
| EN ISO 2758:2003 |
Paper - Determination of bursting strength (ISO 2758:2001) |
| EN ISO 2759:2003 |
Board - Determination of bursting strength (ISO 2759:2001) |
| EN ISO 3037:2007 |
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007) |
| EN ISO 4119:1996 |
Pulps - Determination of stock concentration (ISO 4119:1995) |
| EN ISO 5263-1:2004 |
Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004) |
| EN ISO 5263-2:2004 |
Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004) |
| EN ISO 5263-3:2004 |
Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004) |
| EN ISO 5264-2:2002 |
Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2002) |
| EN ISO 5267-1:2000 |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999) |
| EN ISO 5267-1:2000/AC:2002 |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999/Cor.1:2001) |
| EN ISO 5269-1:2005 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005) |
| EN ISO 5269-2:2004 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method (ISO 5269-2:2004) |
| EN ISO 5270:1999 |
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:1998) |
| EN ISO 534:2005 |
Paper and board - Determination of thickness, density and specific volume (ISO 534:2005) |
| EN ISO 5350-1:2006 |
Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006) |
| EN ISO 5350-2:2006 |
Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006) |
| EN ISO 536:1996 |
Paper and board - Determination of grammage (ISO 536:1995) |
| EN ISO 7263:1995 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994) |
| EN ISO 801-1:1996 |
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994) |
| EN ISO 801-3:1996 |
Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994) |
| EN ISO 8254-1:2003 |
Paper and board - Measurement of specular gloss - Part 1: 75° gloss with a converging beam, TAPPI method (ISO 8254-1:1999) |
| EN ISO 8254-2:2003 |
Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003) |
| EN ISO 9706:1998 |
Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| ENV 12282:1996 |
Paper - Printing and business paper - Determination of edge dust |