Application: Drywall Joint Gummed Kraft Paper Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering. Joint tape is super strong both wet and dry. The tapered edges offer invisible seams. Joint tape is sparked, making it the type preferred by professionals. Specifications: 50mmX20m, 50mmX45m, 50mmX60m, 50mmX90m, 50mmX153m. etc. Other specification upon customer's request. How to Finish Wallboard Joints: 1. Firmly press joint compound into wallboard joints over an approximate 4" wide area. 2. Center Joint Paper Tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess. 3. Make sure nail heads are driven in at least 1/32". Apply joint compound to nail head indentations. 4. After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3"- 4" width on each side. Apply second coat to nail heads. 5. Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8" on each side. Apply final coat to nail heads. 6. When completely dry, at least 24 hours after final coat, sand smooth. Finishing Inside Corners: Apply compound to both sides of corner. Crease tape and embed. Apply a thin coat on both sides of tape. When dry, apply a second coat to one side only. Let dry, then finish the other side. When dry, sand until smooth. Finishing Outside Corners: Use broad knife to apply the joint compound over the corner bead flange for the outside corners. The first coat should be approximately 6" wide, and the second coat 6"- 10" wide applied on each side of corner. Equipment: Joint Paper Tape is designed for Banjo-style taping machines, automatic taping systems and hand taping. Coverage (approximate): Joint PaperTape is 5cm wide. Exact coverage upon the length of the tape. Caution: Apply Joint PaperTape only at the recommended temperatures of the joint cement used. Store tape in closed cartons at normal room temperature in an enclosed, dry shelter. Limited Warranty: This product is warranted to be uniform and of the highest quality. Welco shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Welco liability under this warran
|FOB Price *||Not Mentioned|
|Sample Terms||Supplier sends free sample and buyer pays the shipping fee.|
|* Prices are subject to change. Please contact the supplier for the latest price.|
More Products from This Company
Similar Products from Suppliers in Other Countries
Our double-coated tape is used for splicing, temporary holding, light duty assembly, permanent bonding, sealing, and joining. Double-coated tapes are available in a wide variety of adhesives and...
Release liners are used to protect the adhesive in numerous tape, label, rubber and sealant products. These materials come in a host of coatings, release levels, and substrates. Release liners are...
Water-activated reinforced tapes offer superior performance for sealing, tabbing, identification core starting, packaging paper, security control and many other uses. Most pressure-sensitive tapes...
Our masking tape is crepe paper tape with excellent strength and bonding capabilities and conforms easily and can be removed after a long application. In some cases it may perform better on rough...