Boston Gear precision machined J and JS Series Universal Joints are designed for connecting shafts at angles up to 30 degrees and speeds up to 2000 RPM. All sizes are stocked with both solid and bored hubs. Joints J100 and J100B and larger are equipped with self-closing, ball valve oilers, creating an oil reservoir to provide enclosed lubrication. The self-locking assembly ring on joints with 7/8 and larger hub diameter, fits into recess provided in center bearing block and snaps around groove in small bearing pin assuring locking of entire assembly allowing for quick and easy disassembly and reassembly. Joints with 3/4 and smaller hub diameters are locked by riveting the small bearing pin. Joint covers (boots) keep dirt and moisture out and lubricants in.
|FOB Price *||Not Mentioned|
|Sample Offered?||Not Applicable|
|Sample Terms||Not Applicable.|
|* Prices are subject to change. Please contact the supplier for the latest price.|
Similar Products from Suppliers in Other Countries
Siphon elbow allows the condensate inside the cylinder to remove, dropping down to the bottom of the cylinder at the angle of 60 degrees from the hinge by rotating 180 degrees around in the...
Salient Features: * Recommended 18m and above Pulpers. * Pulley Drive Beyond 370 Kw is not Recommended Due to High Belt Pull on Motor shaft * Simple Installation with Horizontal Motor (B3) Instead...
We have 22 nos. of 1.5 dia dryer cylinders, two presses of granite and suciton press roll, copper couch roll with suction vacuum box, five stack calander and online MD sitter. Other items include...