Machinery / Equipment / Supplies in South Asia

Semi-Automated Sheet Former(Model 2005 C): With White Water Re-Circulation System, Pneumatic Sheet Press & Rapid Dryer mounted on base table complete with accessories.View details

Automatic Sheet Former (Microcontroller Based) Complete With Sheet Press & Rapid Dryer: The automatic Sheet Former consists of a sheet forming and drying/pressing section. Keypad entry of all...View details

For determination of moisture content in materials which do not undergo chemical change when exposed to infra red radiation. 250 watts infra red lamp provided as heating element. Testing capacity...View details

Automatic Drop Tester: To determine the ability of a package to withstand the rigors of handling by people and machinery in the distribution environment. Control and hoisting features facilitates...View details

DEWATERING UNIT: Compression cum dewatering unit with variable speed compression screw for pressurized de watering of wood chips to get less moisture wood chips for mechanical pulping the wood...View details

GURLY TYPE: A. For measuring porosity, air permeability or air resistance of paper and paper products by determining the time necessary for a certain volume of air to flow through the inserted...View details

Standard Paper Testing Waxes: For determining the resistance to picking of the surface of the paper. Wax cross section area 18X18 mm. Each wax is of hard resin non-oily type. Each box contains 8...View details

This equipment measure the roughness / smoothness as per the condition apply in the printing press nip at the moment of printing, by clamping the sample between a precise measuring head and a...View details

Lab Air Knife Coater: For coating the sample sheet materials in 10" X 12" size. The air-knife design of the coaler guarantees uniform coating of the coating medium on to the test specimen. Suitable...View details

To study the dienking effect of printed recycled paper by flotation method in laboratory. Stainless steel container capacity 25-liter specially designed aerator with variable speed and digital...View details

SOMERVILLE TYPE: For determining the shieve content in ground wood pulp. Designed in accordance with second report of the Pulp Evaluation Committee to the Technical Section of Paper Makers...View details

Fibretec Printability Tester: For laboratory testing of paper and ink in simulate actual condition as in printing. The equipment is designed to determine the accurate simulation of offset letter...View details

For preparation of chips from wood, for lab and educational purposes. Capacity max 500 kg/h chips. Chipping disc 350 mm diameter, speed 700 rpm. Input tube diameter 80 mm set at and angle of about...View details

For accurate and rapid preparation of test pieces. A. Precision Sample Cutter - Provided with an automatic clamping device, which by means of clamping beam, holds the sheet material firmly prior to...View details

Pulp Color Reversion Apparatus: Designed for rapidly determining the yellowing properties of different types of Pulp grade.View details

Laboratory Calender: For performing calender experiments and trials in the laboratory environment. Provided with three roller stacks with a face width of 300 mm. Adjustable line pressure 0-100...View details

The refiner is intended for wet grinding and defibrating chips or experimental pulp making. It is utilized for developing pulping processes and strength development studies on raw steamed or semi...View details

Lab Bar Coater: Designed for the application of the paints, varnishes, adhesives, liquid printing inks and many other surface coating which require sampling under accurately controlled conditions....View details

(Hand Wheel Type) For cutting out circular sample of paper, board and similar materials. One test specimen at a time A. 50cm2 B. 100cm2 C. 150cm2View details

For Speedy and accurate cutting of circular & square samples, without any deformation and damage. Suitable for cutting a very wide range of sheet material such as plastics, textiles, paper and...View details

Coating Rods (Set of 7 No. Rods) Suitable for Bar Coater or K control coater Please contact us for more details.View details

For shortening the drying time of wet pulp or paper samples before determining the dry weight or moisture content. Provided with Flat heating Elements. Suitable for Sheet Size: Max. width 250 mm,...View details

COBB TYPE: For determining the absorptive capacity of paper by measuring the amount of fluid (aqueous or non-aqueous, fluids, oils, varnishes) absorbed by the paper surface. Suited for evaluating...View details

Laboratory Heat Sealer: To perform heat-sealing of samples. With adjustable jaw pressure and temperature control from ambient to 400 °C.View details

JOHNSON TYPE: To study pulp yield and other processing the cooked pulp fractionate through vibrating strainer for separating shieves fiber flock from a continuously fed pulp sample while diluting...View details

Environmental Chamber: For conditioning of the samples before test. Temperature 10° to 60° C. Accuracy ± 0.5 ° C, Humidity range 30-90%. Accui.'"-y ± 3%. Inner chamber size 700 X 450 X 450 mm....View details

For investigating the fiber length distribution in pulp. Each unit provided with an electric motor for driving the rotor and is fully self-contained. All units easily combined in cascade mode. The...View details

Laboratory Oven: For moisture determination of Pulp, Paper & Paperboard etc. Temperature range from room temperature to 250 °C thermostat accuracy within ± 1° C. Air circulation by fan. Option:...View details

For determining the ash content in paper, cardboard and other cellulose material, by burning an exactly weighed quantity. Options - Digital Temperature Indicator and controlView details

Laboratory Seal Strength Tester: To check evaluate the interfacial adhesion properties of flexible packaging material retaining peak values, automatic or normal zero setting, overload and over...View details