Sealing, floating, and deininking cell. It's a single machine where 3 stages in series would, otherwise, be required. Or to replace 4 to 5 conventional stages. Reject discharge is achieved through slight overpressure, which is adjustable and can be controlled without fiber being carried away with the foam. In most case secondary machine is not required. Losses and quality can also be optimized. Air is added through special canisters containing auto-clean injectors which are separate from floating machine's body. If required, this permits the system to adjust the quality of air added. Moreover, air bubbles adhere much better to the particles to be removed due to a special mixing chamber. The auto-clean injectors will not plug. With the same losses, this floating machine can yield 1-1.5% higher brightness than existing systems.
|FOB Price *||Not Mentioned|
|Sample Terms||Not Applicable.|
|* Prices are subject to change. Please contact the supplier for the latest price.|
More Products from This Company
Similar Products from Suppliers in Other Countries
The Parason De-inking cell consists of number of cells in series with elliptical cross section with a baffle extending over the entire length to separated suspension chamber. Air (at the atmosphere...
The purpose of de- inking is to remove the printing inks, stickies that might effect the paper making process. In a de-inking process ink is detached from fiber. Flotation technology provides high...
APPLICATION: For removal of spinning contaminants such as wires, rags, strings, plastics by means of ragger rope. FEATURES: *Easy installation with horizontal and vertical type of pulper. ...
WORKING PRINCIPLE: The tangential inlet accelerates the stock to downward centrifugal motion. Sand with high specific gravity is forced to the outer wall of cone and downward to collect in a trap...
REMOVAL OF PRINTING INK, STICKIES FROM SECONDARY FIBER: The purpose of de-inking is to remove the printing inks and other substances like stickies that might affect the paper making process or the...